By ImpLosioNOn

Prtg gibi bir programla mailcleaner dinlemek istiyorsanız, belli başlı oidlere ihtiyacınız var.

Bunların genel listesi aşağıdaki gibidir.

Eğer belli bir oidin tam karşılığını bulmak istiyorsanız /usr/mailcleaner/etc/snmp altındaki snmpd.conf u inceleyebilirsiniz.

Örnek olarak,

Sadece filter incelemek isterseniz, aşağıdaki dosyada değişiklik yapmak gerekti.

nano /usr/mailcleaner/etc/snmp/snmp.conf u açtığımda

exec  getspools /usr/mailcleaner/bin/get_status.pl -p olduğunu görüyorum.

nano /usr/mailcleaner/bin/get_status.pl yi açtığımız da

elsif ($mode_given =~ /p/) {
my @spools = (‘exim_stage2’);
foreach my $key (@spools) {
if ($key !~ m/^exim_stage2$/) {

ilgili satırda exim_stage1, 2 ve 4 vardı. 1 Incoming , 2 filtering, 4 ise outgoing şeklindeydi. Diğerlerini kaldırıp sadece 2yi bırakarak sadece filteringi görmesini sağladım.

Gerisi size kalmış.

  • extOutput.1 (1.3.6.1.4.1.2021.8.1.101.1) : number of filtered messages(integer)
  • extOutput.2 (1.3.6.1.4.1.2021.8.1.101.2): number of spams detected(integer)
  • extOutput.3 (1.3.6.1.4.1.2021.8.1.101.3): number of bytes filtered(integer)
  • extOutput.4 (1.3.6.1.4.1.2021.8.1.101.4): number of viruses detected(integer)
  • extOutput.5 (1.3.6.1.4.1.2021.8.1.101.5): processes status (boolean list e.g: |1|1|1|1|1|1|1|1).
    Definition and order of processes (0 = down, 1= running):
    • incoming MTA (critical)
    • queuing MTA (critical)
    • outgoing MTA (critical)
    • Web GUI (not critical)
    • antispam/antivirus process/filtering engine (critical)
    • master database (not critical)
    • slave database (critical)
    • firewall (not critical)
  • extOutput.6 (1.3.6.1.4.1.2021.8.1.101.6): spools status, number of messages in queues (integer list, e.g.:|190|4|26)
    Definition and order of spools:
    • incoming : incoming MTA. Messages can be stored here on massive attacks, or when the MailCleaner is used as an outgoing relay for your network.
    • filtering: main engine spool. Messages are stored here when processed by the engine. Less than 300 messages is normal because messages are NOT deleted here until process if completly finished). More messages can be an indication that your system is getting a little bit busy at the time.
    • outgoing: outgoing MTA. MEssages are stored here when they cannot be delivered immediatly (temporary failure of destination host)
  • extOutput.7 (1.3.6.1.4.1.2021.8.1.101.7):system load (load) (float list, e.g. |5.29|3.79|3.55)
    Definition and order of loads:
    • 5 minutes: 5 last minutes average
    • 10 minutes:10 last minutes average
    • 15 minutes: 15 last minutes average dernières minutes
  • extOutput.8 (1.3.6.1.4.1.2021.8.1.101.8): disk partitions usage (list of string, e.g. |/|32%|/var|35%)
  • extOutput.9 (1.3.6.1.4.1.2021.8.1.101.9): system memory usage(integer list, e.g. |2068628|177144|1951888|1936572)
    Definition and order of usages:
    • total physical memory
    • free physical memory
    • total swap memory
    • free swap memory
  • extOutput.10 ((1.3.6.1.4.1.2021.8.1.101.10): all daily counts (integer list)
    Definition and order of counts:
    $total_bytes|$total_msg|$total_spam|$percentspam|$total_virus|$percentvirus|$total_content|$percentcontent|$total_clean|$percentclean
    • number of bytes filtered
    • number of messages filtered
    • number of spams detected
    • spam percentage
    • number of viruses detected
    • viruses percentage
    • number of dangerous content detected
    • dangerous content percentage
    • number of clean messages
    • clean messages percentages